Table of Contents
Advertisement
FRAMING DIMENSIONS
NOTE: If not purchasing the optional steel stud kit - adhere to the same framing if purchasing steel studs elsewhere. The use of the optional kit is highly
recommended as it was designed specifically for the product to facilitate ease of installation.
Framing
Description
Dimensions
A
Framing Height
B
Framing Width
*
C
Framing Depth
D
Minimum Height to Combustibles
E
Corner Wall Depth
F
Corner Facing Wall Width
G
Vent Centerline Height
H
Non-combustible facing height
I
Gas Connection Opening Height
J
Gas Connection Height
K
Gas Connection Inset
L
Gas Connection Opening Width
*
Framing depth measurement is noted with the side nailing strips set as far forward on the firebox as possible.
The side nailing strips can be adjusted back up to 3-1/8" to allow for varying thicknesses in non-combustible
material & wall finishes.
Important: The minimum framing dimensions given for height, width and depth must be maintained even if
using non combustible materials.
Dangerous operating conditions will occur if minimum framing dimensions are not adhered to.
*
HZ54E
46-5/8" (1184mm)
60" (1524mm)
23-3/4" (603mm)
51" (1295mm)
69" (1753mm)
97-9/16 (2478mm)
44" (1118mm)
20" (508mm)
1-1/2" (38mm)
4" (102mm)
7-1/4" (184mm)
3-1/4" (83mm)
Regency Horizon
installation
|
®
HZ54E-10 Gas Fireplace
15
|
15
Advertisement
Table of Contents
