Table of Contents
Advertisement
HZ54E
installation
|
42
1. Secure the left side mounting bracket to the backside of the faceplate
as shown below. Use 3 screws supplied to secure the mounting
bracket in place. Repeat for right side.
Left Side
Mounting Bracket
NOTE: Ensure that the faceplate is positioned correctly when installing
the mounting brackets to the faceplate. There is a top and bottom,
the top of the faceplate has a full 1" return whereas the bottom only
has a 1/2" return as shown in the diagram below.
42 |
®
Regency Horizon
HZ54E-10 Gas Fireplace
919-387
FACEPLATE INSTALLATION
Mounting Bracket
shown in place
2
2. Install the faceplate to the unit by hooking the left and right side
mounting brackets into the mounting slots at the side of the fi rebox
as shown below. It is recommended that you use the fi rst mounting
slot (the one closest to the door frame overlay) out of the 5 so that
the faceplate and door frame overlay are fl ush with one another. See
diagram below.
NOTE: There are 5 mounting slots available, this is to accomodate
any fi nishing that protrudes slightly beyond the faceplate.
First Mounting Slot
(recommended)
12.15.14
Advertisement
Table of Contents
