Using Sticky Media - Roland Soljet EJ-640 User Manual

Accommodating Different Media Types and Conditions

Using Sticky Media

Procedure

Press

MENU
SUB MENU

SUB MENU
MEDIA RELEASE

MEDIA RELEASE
DISABLE ENABLE

Press
Description
Some types of media may tend to stick to the platen. Starting printing with the media sticking to the platen
4
may make normal media feeding impossible and cause the media to jam. When using such media, set the
[MEDIA RELEASE] menu item to "ENABLE." This peels off the media before starting printing if it is stuck to the
platen. Note, however, that media feeding may be unstable when printing is performed after executing this
operation. Leave this menu item set to "DISABLE" unless you specifically need to change it.
Default Setting
[MEDIA RELEASE]: DISABLE
102
.
Press
on the left.
Press
Press
on the left.
Press
Press
Press
, then to go back to the original screen.
several times to display the screen shown
.
several times to display the screen shown
.
or to select "ENABLE."
to confirm your entry.