Accommodating to the Types and Condition of Media
Using Sticky Media
Procedure
Press
MENU
SUB MENU
SUB MENU
MEDIA RELEASE
MEDIA RELEASE
DISABLE
Press
Description
Some types of media may tend to stick to the platen. Starting printing with the media sticking to the platen
4
may make normal media feed impossible and cause the media to jam. When you're using such media, set the
[MEDIA RELEASE] menu item to "ENABLE." This peels off the media if sticking before starting printing. Note,
however, that media feed may be unstable when printing is performed after executing this operation. Leave
this menu item set to "DISABLE" unless you specifically need to change it.
Default Setting
[MEDIA RELEASE]: DISABLE
94
.
Press
Press
Press
Press
Press
ENABLE
Press
to go back to the original screen.
several times until the screen on the left appears.
.
several times until the screen on the left appears.
.
to select "ENABLE."
to enable the setting.