Notes On Timezones; Notes On Xscf Web - Fujitsu SPARC Enterprise M3000 Product Notes

Change the stratum value of the NTP server
■
Of the NTP server which XSCF refers to, change the stratum value to "1." An NTP
server which has the stratum value of "1" becomes the most significant clock
source and has no refid. Therefore, there is no chance that it will have the same
address as the XSCF's own local clock.
When you change the stratum value of an NTP server, make sure in advance that
it has no impact on other NTP clients.
Change the address of the XSCF's own local clock
■
By using the setntp -m localaddr=value command, change the address of the
XSCF's own local clock. In value, specify the least significant byte of the clock
address of the local clock 127.127.1.x for value. A numeric from 0 to 3 can be
specified. By specifying either from 1 to 3, the address of an NTP server which is
referring to the local clock does not correspond to the address of the XSCF
internal local clock anymore, and a server which is referring to the local clock can
also be set as the NTP server of XSCF.

Notes on Timezones

The time zones (regions/location names) supported by the XSCF can be changed to
support the latest time zone information.
For any previously set time zone that the system can no longer use, the XSCF
switches from this unusable time zone to Coordinated Universal Time (UTC) and
operates in UTC.
When the set time zone operates in UTC, execute the settimezone -c settz -a
command, and check the settable time zones. If the time zone list does not have a set
time zone, set a time zone again.

Notes on XSCF Web

Under the Windows 7 with Internet Explorer 8.0, 9.0, or 10.0 environment, XSCF
■
Web does not support the use through the built-in Administrator account.
On Internet Explorer 8.0, when you move the on-screen horizontal frame up or
■
down to change the frame height and use the [Monitor Msg Show/Hide] button,
the screen background color may turn black. In this case, click Refresh on the
View menu or press [F5] key to refresh the display, to go back to the screen right
after the login.
When you moved the on-screen horizontal frame up or down to change the frame
height, do not use the [Monitor Msg Show/Hide] button.
Chapter 2 XCP 1121 and XCP 1121-related Information 11