Fujitsu SPARC Enterprise M3000 Product Notes page 48

XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
TABLE 3-3
M4000
ID M3000 M5000
RTIF1- O
070914-014
RTIF1- O
070914-015
RTIF1- O
070914-016
RTIF1- O
070914-017
RTIF1- O
070914-018
32 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
M8000
M9000 Description
O On the XSCF Web, when you use a
user account without an appropriate
privilege to select [Snapshot], set the
parameters of [Start time] or [End
time] and execute the [Download]
button, it doesn't result in a privilege
error but the parameter error will be
displayed.
O On the XSCF Web, when you select
[User Manager] to add the user
account, the user name to be specified
is limited up to 20 characters.
O On the XSCF Web, when you select
[LDAP] to perform the LDAP
configuration, if you execute [Save]
while the [LDAP Search Timeout]
remains as its default value "0," it
results in "LDAP Configuration
Update Failed. Save LDAP
Configuration Data failed,"
and the setting can't be stored.
O On the XSCF Web, when you select
[LDAP] and input the [LDAP Search
Timeout] with a value which exceeds
the maximum 2147483647 seconds, it
doesn't result in parameter error.
O On the XSCF Web, when you use a
user account without an appropriate
privilege to select [LDAP] and execute
the [Delete] button, it results in a
privilege error but the configuration
information which has been displayed
will be cleared and seems as if
deleted.
Workaround
None available at this time.
To specify a user name of 20
characters or more, use the
adduser(8) command.
Since "0" is an invalid value in the
[LDAP Search Timeout], do not fail to
set a value other than 0.
None available at this time. The
maximum 2147483647 seconds will be
set to the [LDAP Search Timeout].
The configuration is not deleted. To
show the configuration information
again, select [LDAP] from the Menu.