Fujitsu SPARC Enterprise M3000 Product Notes page 46

XCP Issues Fixed in Releases Earlier Than XCP 1121 (Continued)
TABLE 3-3
M4000
ID M3000 M5000
RTIF1- O
070914-001
RTIF1- O
070914-002
RTIF1- O
070914-003
RTIF1- O
070914-005
RTIF1- O
070914-006
RTIF1- O
070914-007
RTIF1- O
070914-008
RTIF1- O
070914-009
30 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
M8000
M9000 Description
O While executing the firmware update
by using the flashupdate(8)
command or BUI, when the import of
XCP executed by using the
getflashimage(8) command or BUI,
the firmware update aborts.
O When the XSCF switching performed,
the monitor message doesn't show the
number of XSCF unit which turned
active.
O When the XSCF switching performed,
there may be "SCF: Board control
error (DMA timeout)" stored in
the error log.
O On the XSCF Web, when using
Internet Explorer 7, on the [User
Accounts] screen, User Local
Accounts doesn't show the Status of
each user.
O When you set the XSCF user account
name to the maximum 32 characters,
you can log in, but then, when you
execute the XSCF Shell or operate the
XSCF Web, "Permission denied"
occurs.
O On the XSCF Web, when you use
Internet Explorer and select [Log
Archives], the [Status of Log
Archiving] screen doesn't show the
status information.
O On the XSCF Web, when you select
[POP] or [SMTP-auth] on the [SMTP]
screen to enter Password, the input
value doesn't appear as "*".
O On the XSCF Web, when selected
[POP] or [SMTP-auth] on the [SMTP]
screen, the setting can be done while
the input field remains blank. And
despite the setting done, the past
setting data appears.
Workaround
Do not execute the import of XCP by
using the getflashimage(8)
command or BUI, while executing the
firmware update.
Execute the showhardconf(8)
command to refer to the state of XSCF
unit.
No workaround is available.
This message can be safely ignored.
None available at this time.
Use up to 31 characters to set the
XSCF user account name.
None available at this time.
None available at this time.
None available at this time.