Fujitsu SPARC Enterprise M3000 Product Notes page 101

TABLE 3-12
Software Documentation Updates
TABLE 3-12
Title
SPARC Enterprise
M3000/M4000/M5000/M
8000/M9000 Servers
Administration Guide
SPARC Enterprise
M3000/M4000/M5000/M
8000/M9000 Servers
XSCF User's Guide
lists known documentation updates.
Page Number Update
44 The description, "The HTTPS service starts immediately after
being enabled.", in step 3 of section "To Enable or Disable the
Service Processor HTTPS Service" will be changed as follows:
With disable, the HTTPS service stops immediately. With enable,
the HTTPS service starts after the XSCF is reset by execution of
the rebootxscf(8) command.
73 The description, "If you create a second IM volume before the
first IM volume completes its synchronization, the first volume's
RAID status will indicate SYNC, and the second volume's RAID
status will indicate OPTIMAL." in Section 5.2.1, "Creating a
Hardware Mirrored Volume" will be changed as follows:
If you create a second IM volume before the first IM volume
completes its synchronization, the first volume's RAID status
will indicate SYNC, and the second volume's RAID status will
indicate DEGRADED
2-17 The host name can include "." (period).
The description, "A label element can contain alphanumeric
characters (a to z, A to Z, 0 to 9), "-" (hyphen) and "." (period).
Each label element must always begin with an alphabetic
character and end with an alphanumeric character. However,
you cannot use a "." (period) in a host name." in "Host
name/domain name" of TABLE 2-2 Network Configuration will
be changed as follows:
A label element can contain alphanumeric characters (a to z, A to
Z, 0 to 9), "-" (hyphen) and "." (period). Each label element must
always begin with an alphabetic character and end with an
alphanumeric character.
2-28 "Configuring XSCF Routing" in Section 2.2.1 Network
Configuration will be changed. See
on page 91 for details.
Chapter 3 Information About Software
"Configuring XSCF Routing"
85