Sun Crypto Accelerator 6000 - Fujitsu SPARC Enterprise M3000 Product Notes

Sun Crypto Accelerator 6000

If you are not using the correct version of the Sun Crypto Accelerator (SCA) 6000
driver, hot-plug operations on SCA 6000 can cause the M8000/M9000 servers to
panic or hang. Version 1.1 of the SCA6000 driver and firmware supports hot-plug
operations after the required bootstrap firmware upgrade has been performed.
Version 1.0 of the SCA6000 driver does not support hot-plug and should not be used.
Hardware RAID Function
RAID technology enables the construction of a logical volume made up of several
physical disks to provide data redundancy, improved performance, or both.
The M8000/M9000 servers mounted with a RAID-capable IOUA support RAID 1
(mirroring) volumes using the Oracle Solaris OS raidctl utility.
Note – When the onboard device card is RAID-capable, the showhardconf(8)
command displays Type 2 in the output.
Requirements for Hardware RAID Support
The table below shows the requirements for the hardware RAID support on the
M8000/M9000 servers.
Requirements for Hardware RAID Support
TABLE 6-2
Item
Required Oracle Solaris
OS/packages/patches
118 SPARC Enterprise Mx000 Servers Product Notes for XCP Version 1121 • February 2016
PCI#0 Name_Property:pci; Card_Type:IOUA;
+ Serial:PP0611T826 ; Type:2;
+ FRU-Part-Number:CA21138-B84X 010AE/371-5000-05 ;
Description
Oracle Solaris 10 8/07
Oracle Solaris 10 5/08 through Oracle
Solaris 10 5/09
Oracle Solaris 10 10/09 or later
Oracle Solaris 11 11/11
*
SUNWigb 138174-04
- 138174-04
- -
- -