Buttons; Section, Function And Arrow Buttons - Oce TDS600 User Manual

Buttons

With the buttons on the operator panel you can make a number of settings for
the Océ TDS600.
The following buttons are available:
Button type
Start buttons
Numeric buttons
Correction button
Stop button
Interrupt button

Section, Function and Arrow buttons

Apart from the above mentioned buttons, the operator panel of the Océ
TDS600 Copier contains a number of other buttons. These include:
Section buttons
Function buttons
Arrow buttons.
The section buttons are the four buttons located above the display. These
buttons provide access to the 'Custom', 'Original', 'Print' and 'File' sections
on the display.
Each section contains several functions (cards). These can be accessed with the
help of the left most function button, which is also called the card selection
button.
Use the Océ TDS600 to scan
Function
The green button marked with
feeding of the original, or to re-start the copy process.
The buttons with numbers on the lower part of the oper-
ator panel are used to enter numbers.
The orange button marked with C, located at the bottom
right of the operator panel. If you press the correction
button once, the copy counter is set to the default (prob-
ably '1'). If you press this button twice, all settings are
reset to their default values.
Pressing the red button to the left of the display stops the
copy process for the current original. You can stop the
original transport immediately when an original jam oc-
curs.
Currently not in use.
is used to start the
61