Oce TDS600 User Manual page 235

Receive time num
hours
Receive time num
minutes
Receive time num
seconds
Source location text
Source page num
number
Source type text
Source width num
Source height num
Output width num
Output height num
Width scale num
Height scale num
Mirroring text
Rotation angle num
Océ Power Logic: Account logging
2 Hour when source page was received. 0-23
2 Minute when source page was received. 0-59
2 Second when source page was received. 0-59
255 Location of the input file or set:
For files in the input stream: F1 to F999 (for the
first until the 999
job).
For referenced files: the URL of the file.
For scans, the input set number to which the page
belongs: S1 to S999 (for the first until the 999
put set). Note: The Océ TDS600 only supports 1
input set.
6 Page number of the input page in the source
set/file. First = 1
Type of the source page:
For PDL's: TIFF, CALS, PDF, PS, NIRS, HPGL,
HPGL2, C4, CALCOMP, ASCII
For scans: SCANF (scan of front of page),
SCANB (scan of back of page)
6 Native width of source page in points (1/72 inch)
6 Native height of source page in points (1/72 inch)
6 Actual width of output page in points (1/72 inch)
6 Actual width of output page in points (1/72 inch)
4 The scaling factor applied to the original in the
width direction. In %.
4 The scaling factor applied to the original in the
height direction. In %.
2 Mirroring applied to the original.
LR (left and right swapped) or TB (top and bottom
swapped). Empty if no mirroring applied.
3 Counter-clockwise rotation angle of the scaled
(and possibly mirrored) original. Possible values:
0, 90, 180, 270. An angle of 0 implies that the ori-
entation of the source and output image is the
same.
th
file in the input stream of this
th
in-
235