Oce TDS600 User Manual page 96

[58] Example of adjusting the leading/trailing edge of an original
Copy with removed filing strips along the leading and trailing edge
Open the 'Sheet' card in the 'Original' section.
1
Press the 'Remove strip' function button.
2
[59] Removing strip
Adjust the values in mm for the trailing edge using the numeric or arrow
3
buttons.
Press the 'Remove strip' function button again.
4
Adjust the values in mm for the leading edge using the numeric or arrow
5
buttons.
Make other settings as required.
6
Feed the original.
7
96 Océ TDS600 Multifunctional Digital System User Manual
Leading edge:
- 40 mm
Trailing edge:
- 40 mm
Leading edge:
+40 mm
Trailing edge:
+ 40 mm