Press the green knob inside the roll holder (on the right side) to release the
4
locking mechanism (see figure 127) and remove the core from the holder.
[127] Pressing the green knob
You can place the new roll in the groove on top of the printer.
Note:
Slide the roll holder in the new roll of material while pressing the green knob.
5
Align the roll with the appropriate size indicator on the roll holder and release
6
the locking mechanism. This line has to be completely visible.
Use both hands to place the holder in the roll compartment (see figure 128).
7
[128] Positioning the roll
242
Océ TDS600 Multifunctional Digital System User Manual
left view