Oce TDS600 User Manual page 169

Number of prints/sets
Description
Min/max values
Menu path
Collate
Description
Min/max values
Menu path
Default print mode
Description
Min/max values
Menu path
User id
Description
Min/max values
Menu path
Océ Power Logic: Settings Editor (for the key operator)
The 'Number of prints/sets' option allows you to define the
default number of prints for each job in the printer memory.
1 - 999
Jobs - Print - Defaults - Number of prints/sets
Specifies whether or not a number of originals should be proc-
essed together as a set. If set processing is off, sorting is al-
ways done by page and every original will be presented as a
job. If set processing is on, sorting is done by page and all
originals will belong to the same job until the set is closed, or
sorting is done by set.
N/A
Jobs - Print - Defaults - Collate
With the print mode the printer Image Logic can be set in a
mode that matches the contents of the image. Setting the de-
fault print mode according to the main stream contents of the
print jobs, will improve the quality of printed images. The de-
fault print mode setting is used when the Image Logic is not
able to automatically detect the appropriate print mode.
Select 'Poster' for images with domination of grey areas.
Select 'Lines/Text' for scanned images.
Select 'Standard' otherwise.
N/A
Jobs - Print - Defaults - Default print mode
You can use the 'User id' option to determine how many jobs
are processed by that user.
N/A
Jobs - Copy & File - Defaults - User id
169