Oce TDS600 User Manual page 215

TIFF
Setting Description
Enable TIFF The 'Enable' option allows you to enable or disable TIFF.
Photometry The 'Photometry' option allows you to define the photometry value
for TIFF.
You can choose from:
- File control
The photometry info in the TIFF header will be used.
- White is zero
The photometry info in the TIFF header will be overruled.
For example:
When the plot is inverted in terms of background and you wish to
correct that, this option can fix the problem and re-invert the plot
(although it depends on the content of the plot)
CALS
Setting Description
Enable The 'Enable' option allows you to enable or disable CALS. In case
CALS of problems with CALS, the CALS PDL can be disabled by select-
ing the 'Disabled' option.
ASCII
Setting Description
Enable The 'Enable' option allows you to enable or disable ASCII. In case
ASCII of problems with ASCII, the ASCII PDL can be disabled by select-
ing the 'Disabled' option.
End of line The 'End of line' option allows you to define the type of line break
used in the ASCII file:
- carriage return (CR) only
- line feed (LF) only
- carriage return and line feed (CR-LF).
Line over- The 'Line overflow' option allows you to define whether a line that
flow extends beyond the right margin is wrapped onto the next line, or
is truncated.
Font size The 'Font size' option allows you to define the font size to use, in
points (1 point=1/72 inch)
Tab size The 'Tab size' option allows you to define the tab size to use.
Océ Power Logic: Settings Editor (for the system administrator) 215