Oce TDS600 User Manual page 77

It is possible that there are more files in the table than fit on screen. The most
recent scanned file appear at the end of the table. Under these circumstances it
is possible that your most recent scanned file is not visible in the table on
screen. In this case you can update the table view.
Update the table view
From the 'View' menu select 'Refresh' or click the 'Refresh' button on the
1
toolbar (see figure 38). If the opened destination is also the one which is
currently scanned to, then the view is automatically updated.
[38] 'Refresh' button on the toolbar
Use the Océ TDS600 to scan 77