Setting "Distance; Setting "Speaker Location - Denon S-301 Operating Instructions Manual

System Setup

Setting "DISTANCE"

• Input the distances from the listening position and the various
speakers to set the surround delay time.
• Upon shipment from the factory default the distance is set to
the default values in step 4 below.
Preparation:
Measure the distance from the listening position to the various
speakers.
FL
Subwoofer
listening position
L1: Distance between front right speaker and listening position
L2: Distance between front left speaker and listening position
L3: Distance between subwoofer speaker and listening position
1
CURSOR •
ª
Press the or
"SPEAKER SETUP" at the "AUDIO SETUP",
ENTER
then press the button.
• The "SPEAKER SETUP" screen appears.
2
Press the
"DISTANCE", then press the
• The distance setting screen appears.
FR
3
Press the
"FEET" or "METERS" for the "DISTANCE"
mode, then press the
button to select
4
Press the
speaker, then press the
to set the distance between the speaker and the
listening position.
• The distance changes by 1 foot (or 0.1 meters when the
unit is set to feet) each time the CURSOR
is pressed. Select the value closest to the measured
distance.
Make sure the difference in the distances set for the
various speakers is no greater than 15 feet (4.5 meters).
If an inappropriate distance is set, "CAUTION: INVALID
DISTANCE" is displayed. Change the position of the
speaker and make the setting over.
To set the distance of the various speakers back to their
default values, press the CURSOR
"DEFAULT" then press the ENTER button.
CURSOR •
ª
or button to select
ENTER
button.
CURSOR 0 or 1 button to select
CURSOR ª
button.
CURSOR •
or ª button to select the
CURSOR
0 or 1 button
or button
0 0 1 1
or button to select
• ª
54
ENGLISH
5
CURSOR ª
Press the button to select "SETUP
ENTER
MENU", then press the
• The "SPEAKER SETUP" screen appears.
6
CURSOR ª
Press the button to select "NEXT
SETUP MENU", then press the
the setting.
• The next screen in the "SETUP" menu screen appears.

Setting "SPEAKER LOCATION"

The optimum acoustics can be achieved by setting the location
of the speakers and the conditions in the room.
1
CURSOR •
Press the or ª
"SPEAKER SETUP" at the "AUDIO SETUP",
ENTER
then press the button.
• The "SPEAKER SETUP" screen appears.
ENGLISH
System Setup
button.
ENTER
to enter
button to select