Nortel 10BASE-T Using Manual page 162

Using the BayStack 410-24T 10BASE-T Switch
Table 3-5. Switch Configuration Menu Screen Options
Option
IGMP Configuration...
Display Port Statistics
Clear All Port Statistics
ATM Configuration...
Return to Main Menu
3-20
Description
Displays the IGMP Configuration Menu (see
Menu" on page 3-72). This screen allows you to optimize IP multicast
traffic by setting up IGMP port memberships that filter IP multicast on
a per port basis (see "IGMP
information about this feature).
Displays the Port Statistics screen (see
This screen allows you to view detailed information about any switch
port.
Allows you to clear all port statistics.
This option is followed by screen prompts that precede a choice of
actions:
• If the switch is operating standalone, choose one of the following:
• Yes, to clear all port statistics for all switch ports
• No, to abort the option
• If the switch is participating in a stack configuration, choose one of
the following:
• Clear all port statistics for a specific unit in the stack
• Clear all port statistics for the entire stack
• No, to abort the option
Appears only when an ATM MDA is installed in one of the units of your
stack configuration. When the ATM MDA is installed, selecting this
option displays the ATM Configuration Menu (see
Menu" on page 3-83).
Note: Your BayStack 410-24T switch does not support the ATM MDA
hardware. However, if a unit in your stack (such as a BayStack 450
switch) is configured with the ATM MDA, you can manage the ATM
MDA from your switch. Refer to the BayStack 450 Switch's User Guide
for detailed information about the ATM MDA.
Exits the Switch Configuration Menu screen and displays the main
menu.
(continued)
"IGMP Configuration
Snooping" on page 1-54
"Port Statistics" on
"ATM Configuration
for more
page 3-79).
309985-C Rev 00