Fail-Safe Stack Application; Figure 1-9. Fail-Safe Stack Example - Nortel 10BASE-T Using Manual

Using the BayStack 410-24T 10BASE-T Switch

Fail-Safe Stack Application

Figure 1-9
BayStack 410-24T switches) that are stacked together as a single managed unit. If
any unit in the stack fails, the remaining stack remains operational.
As shown in
connecting to a BayStack 450 switch with an optional gigabit 1000BASE-SX
MDA for maximum bandwidth (the BayStack 410-24T switch does not support
optional gigabit and ATM MDAs).
This configuration uses optional BayStack 400-ST1 Cascade Modules to connect
the switches in the fail-safe stack. For an overview of the fail-safe stacking feature
that is available for the BayStack 410-24T switches, see
following this section.
Accelar switch
Figure 1-9.
1-26
shows eight switches (a single BayStack 450 switch and seven
Figure 1-9, an Accelar 1100 switch is used as a backbone switch,
CPU PS1 PS2 FAN
F
BayStack 450-24T
BayStack 410-24T
BayStack 410-24T
BayStack 410-24T
BayStack 410-24T
BayStack 410-24T
BayStack 410-24T
BayStack 410-24T
Fail-Safe Stack Example
"Stack Operation"
Up to
24 users
Up to
28 users
Up to
28 users
Up to
28 users
Up to
28 users
Up to
28 users
Up to
28 users
Up to
28 users
BS41008A
309985-C Rev 00