Figure 3-36. Lec Configuration Screen; Table 3-32. Lec Configuration Screen Fields - Nortel 10BASE-T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Unit:
LEC:
LEC Status:
LEC State:
ELAN Name:
VLAN:
LEC VPort:
Desired Physical Port:
Actual Physical Port:
LEC Fail Over:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-36. LEC Configuration Screen
Table 3-32
Table 3-32. LEC Configuration Screen Fields
Field
Unit
LEC
3-86
LEC Configuration
describes the LEC Configuration screen fields.
Description
Allows you to select another stack unit that is configured with an ATM MDA. To view
or configure another ATM MDA, type its unit number and press [Enter], or press the
spacebar to toggle the unit numbers. This field appears only if the ATM MDA is
installed in a switch that is part of a stack configuration.
Allows you to specify the LEC virtual port you want to configure.
Default 1
Range 1, 2, 3, 4
[ 1 ]
[ 1 ]
[ Disable ]
Disabled
[ default ]
0
25
[ A1 ]
A1
Disabled
Press Ctrl-C to return to Main Menu.
(continued)
309985-C Rev 00