Using the BayStack 410-24T 10BASE-T Switch
IP Configuration/Setup
The IP Configuration/Setup screen
BayStack 410-24T switch IP configuration parameters. Data that you enter in the
user-configurable fields takes effect as soon as you press [Enter].
Note: The ping feature is not operational in a mixed-stack configuration that
includes one or more Business Policy Switches.
Choose IP Configuration/Setup (or press i) from the main menu to open the
IP Configuration/Setup screen.
In-Band Stack IP Address:
In-Band Switch IP Address: [ 0.0.0.0 ]
In-Band Subnet Mask:
Default Gateway:
IP Address to Ping:
Start Ping:
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu.
Figure 3-3.
IP Configuration/Setup Screen
Note: The read-only fields in this screen are updated based on the BootP mode
specified in the BootP Request Mode field. (See
Mode" on
3-8
IP Configuration/Setup
BootP Request Mode:
Configurable
-------------------
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ 0.0.0.0 ]
[ No
]
page 3-10
for more information.)
(Figure
3-3) allows you to set or modify the
[ BootP Disabled
In Use
---------------
0.0.0.0
0.0.0.0
Press Ctrl-C to return to Main Menu.
"Choosing a BootP Request
]
Last BootP
---------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
309985-C Rev 00