Nortel 10BASE-T Using Manual page 239

Table 3-35. Console/Comm Port Configuration Screen Fields
Field
TELNET Stack
Password Type
Console Read-Only
Switch Password
Console Read-Write
Switch Password
309985-C Rev 00
Description
Enables password protection for accessing the console interface (CI) of any
participating switch in a stack configuration, through a TELNET session.
If you set this field to Required, you can use the Logout option to restrict access
to the CI of any stack unit. Thereafter, you will need to specify the correct
password at the console-terminal prompt when accessing the stack. See
Console Read-Only Stack Password and Console Read-Write Stack Password
for more information.
Default None
Range None, Local Password, RADIUS Authentication
When the Console Switch Password field is set to Local Password (for TELNET,
for Console, or for Both), this field allows read-only password access to the CI of
a standalone switch. Users can access the CI using the correct password (see
default), but cannot change parameters or use the Reset option or Reset to
Default option.
Default user
Range An ASCII string of up to 15 printable characters
When the Console Switch Password field is set to Local Password (for TELNET,
for Console, or for Both), this field allows read-write password access to the CI of
a standalone switch. Users can log in to the CI using the correct password (see
default), and can change any parameter, except the stack passwords.
You can change the default passwords for read-only access and read-write
access to a private password.
Default secure
Range Any ASCII string of up to 15 printable characters
Caution:
If you change the system-supplied default passwords, be sure to
write the new passwords down and keep them in a safe place. If you forget the
new passwords, you cannot access the console interface. In that case, contact
Nortel Networks for help.
Achtung: Wenn Sie die für das System standardmäßig eingestellten Paßwörter
ändern, notieren Sie sich die neuen Paßwörter, und bewahren Sie sie an einem
sicheren Ort auf. Falls Sie die neuen Paßwörter vergessen, können Sie nicht
mehr auf die Konsolenschnittstelle zugreifen. Wenden Sie sich in diesem Fall an
Nortel Networks, um Unterstützung zu erhalten.
Using the Console Interface
(continued)
(continued)
3-97