Nortel 10BASE-T Using Manual page 161

Table 3-5. Switch Configuration Menu Screen Options
Option
MAC Address Table
MAC Address-Based Security...
VLAN Configuration...
Port Configuration...
High Speed Flow Control
Configuration...
MultiLink Trunk Configuration... Displays the MultiLink Trunk Configuration Menu (see
Port Mirroring Configuration...
Rate Limiting Configuration...
309985-C Rev 00
Description
Displays the MAC Address Table screen (see
page 3-21). This screen allows you to view all MAC addresses and
their associated port or trunk that the switch has learned, or to search
for a particular MAC address (to see if the switch has learned the
address).
Displays the MAC Address Security Configuration Menu (see
Address-Based Security" on
following options: MAC Address Security Configuration, MAC Address
Security Port Configuration, MAC Address Security Port Lists, and
MAC Address Security Table. This menu allows you to set up your
MAC address-based security for your switch.
Displays the VLAN Configuration Menu (see
Menu" on page 3-39). This menu provides the following options: VLAN
Configuration, VLAN Port Configuration, VLAN Display by Port, and
Traffic Class Configuration. This menu allows you to create and modify
VLANs.
Displays the Port Configuration screen (see
page 3-53). This screen allows you to configure a specific switch port,
all switch ports or, when in a stack configuration, all stack ports.
Appears only when a gigabit MDA is installed in one of the units of a
stacked configuration. When the gigabit MDA is installed, selecting
this option displays the High Speed Flow Control Configuration screen
(see "High Speed Flow Control
Configuration" on page
options: MultiLink Trunk Configuration, and MultiLink Trunk Utilization.
This menu allows you to create and modify trunks, and to monitor the
bandwidth utilization of configured trunks.
Displays the Port Mirroring Configuration screen (see
Configuration" on page
single switch port as a traffic monitor for up to two specified ports or
addresses.
Displays the Rate Limiting Configuration screen (see
Configuration" on page
forwarding rate of broadcast and IP multicast packets.
Using the Console Interface
"MAC Address
page 3-23). This menu provides the
"VLAN Configuration
"Port
Configuration" on
3-58). This menu provides the following
3-65). This screen allows you to designate a
3-69). This screen allows you to limit the
Table" on
"MAC
Configuration" on
page 3-55).
"MultiLink Trunk
"Port Mirroring
"Rate Limiting
(continued)
3-19