Mac Address Security Port Configuration - Nortel 10BASE-T Using Manual

Using the BayStack 410-24T 10BASE-T Switch
Table 3-8. MAC Address Security Configuration Screen Fields
Field
DA Filtering on Intrusion
Generate SNMP Trap on
Intrusion
Clear by Ports
Learn by Ports
Current Learning Mode

MAC Address Security Port Configuration

The MAC Address Security Port Configuration screen (Figures
allows you to Enable or Disable the MAC address security for each port.
3-28
Description
When set to Enabled, this field isolates the intruding node by filtering
(discarding) packets sent to that MAC address.
Default Disabled
Range Disabled, Enabled
When set to Enabled and a MAC intrusion event is detected, the software
issues an SNMP trap message to all registered SNMP trap addresses.
Default Disabled
Range Disabled, Enabled
This field clears the specified port (or ports) that are listed in the
Allowed Source field of the MAC Address Security Table screen (see
Address Security Table" on
be cleared using this field, the specific port (or ports) will be cleared for each
of the entries listed in the MAC Address Security Table. If you totally clear the
allowed Source field (leaving a blank field) for any entry, the associated MAC
address for that entry is also cleared. This field also clears the associated Port
List field in the MAC Address Security Port Lists screen
Default NONE
Range NONE, ALL, a port number list (for example, 1/1-4,3/6,4/ALL)
All source MAC addresses of any packets received on the specified port (or
ports) are added to the MAC Security Table when the Current Learning Mode
field (see next field description) is set to Enabled. You cannot include any of
the ports that are enabled for MAC address security (see
Security Port Configuration" on
Default NONE
Range NONE, ALL, a port number list (for example, 1/1-4,3/6,4/ALL)
Indicates the current learning mode for the switch ports. When this field is set
to Enabled, all source MAC addresses of any packets received on the
specified port (or ports) are added to the MAC Security Table (maximum of
448 MAC address entries allowed).
Default Disabled
Range Disabled, Enabled
page 3-36). When you specify a port (or ports) to
page 3-28).
(continued)
"MAC
(Figure 3-13).
"MAC Address
3-10 and 3-11)
309985-C Rev 00