Nortel 10BASE-T Using Manual page 141

10base-t switch
Table of Contents

Advertisement

6.
7.
Proceed to
the menus and screens you can use to customize your configuration.
309985-C Rev 00
Note: IP addresses are written as four decimal numbers (for example,
123.123.123.123). Each decimal number represents an 8-bit octet. When
strung together, the four octets form the 32-bit Internet address. This is
called dotted-decimal notation. The largest possible value of a field in a
dotted-decimal number is 255, which represents an octet of all ones.
Enter the IP subnet mask address in the In-Band Subnet Mask field, then
press [Return].
Enter the default gateway address in the Default Gateway field, then
press [Return].
Chapter 3, "Using the Console
Installing the BayStack 410-24T Switch
Interface," for detailed descriptions of
2-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Baystack 410-24t

Table of Contents