Figure 17 Port Dialog Box - Ip Address Tab; Table 13 Ip Address Tab Fields - Nortel Passport 8683POS Using Manual

66 Chapter 4 Managing the Passport 8683POS Module
5
To enable IP routing, in the IpConfigAdminStatus field, click open.
6
To configure an IP address for the port:
a
b Choose Edit > Port.
c
Figure 17 Port dialog box — IP Address tab
Table 13

Table 13 IP Address tab fields

Field
IpAddress
NetMask
BcastAddrFormat
ReasmMaxSize
VlanId
BrouterPort
d Click Insert.
209564-A
Highlight the port.
The Port dialog box opens with the Interface tab displayed
page 56).
Click the IP Address tab.
The IP address tab opens
describes the fields in the IP Address tab.
Description
IP address to which the entry's addressing information pertains.
The subnet mask associated with the IP address of the entry.
The IP broadcast address format used on this interface.
The size of the largest IP datagram which this entity can
re-assemble from incoming IP fragmented datagrams received on
this interface.
Unique VLAN identifier.
indicates whether this entry corresponds to a brouter port (as
oppose to a routable VLAN). This value cannot be changed after
the row is created.
The Port, Insert IP Address dialog box opens
(Figure 17).
(Figure
(Figure 14 on
18).