SONET loopback test feature
This section describes the loopback test features in Device Manager available for
the Passport 8683POS Module. For information on the CLI test commands, see
"Test commands" on page
Note: All ports must be in test mode to conduct any testing.
To test for loopback:
1
Highlight the port.
2
Choose Edit > port.
The Port dialog box opens with the Interface tab displayed
page
3
In the AdminStatus field, click testing.
4
Click Apply.
5
Click the Test tab.
The Test tab opens
Figure 24 Port dialog box — Test tab
Table 19
Chapter 4 Managing the Passport 8683POS Module
127.
56).
(Figure
describes the Test tab items.
24).
Using the Passport 8683POS Module
75
(Figure 14 on