Figure 8 Closing The Inserter/Extractor Levers; Figure 9 Tightening The Retainer Screws - Nortel Passport 8683POS Using Manual

Figure 8 Closing the inserter/extractor levers

5
Tighten the retaining screws

Figure 9 Tightening the retainer screws

6 Connect the interface cables.
You must install at least one MDA on the Passport 8683POS Module in order to
pass traffic. For instructions on installing MDAs, refer to Installing the Passport
8683POS Module MDAs.
For information on configuring and managing the Passport 8683POS Module,
refer to Chapter 4, "Managing the Passport 8683POS Module," on page
Chapter 3 Installing the Passport 8683POS Module
10037FA
(Figure 9).
10038FA
Using the Passport 8683POS Module
39
45.