Table of Contents
Advertisement
70
Chapter 4 Managing the Passport 8683POS Module
Table 15 Basic tab fields (continued)
Field
SubnetAddr
SubnetMask
b To assign the POS ports to the VLAN as static members, enter the ports in
c
d Enter the POS ports in the NotAllowToJoin column.
e
5
To disable bridging:
a
b In the Bridge area, BridgeConfigAdminStatus field, click Close.
6
To enable IPX routing on each selected port:
a
b In the IPX area, IpxcpAdminStatus field, click Open.
7
To enable the port on both Passport 8683POS Modules:
a
b In the AdminStatus field, click Up.
8
Click Apply.
209564-A
Description
IP subnet address of this VLAN. This value is meaningful only if
rcVlanType is equal to byIpSubnet(2). For other VLAN types it
should have the value 0.0.0.0.
IP subnet mask of this VLAN. This value is meaningful only if
rcVlanType is equal to byIpSubnet(2). For other VLAN types it
should have the value 0.0.0.0.
the StaticMembers column.
To assign all other ports to the VLAN as active members, enter the ports
in the ActiveMembers column.
Click Apply.
Click the POS PPP tab.
Click the POS PPP tab.
Click the Interface tab.
Advertisement
Table of Contents
