Table of Contents
Advertisement
Table 9 Passport 8683POS Module default settings (continued)
Parameter
Lock
Lqr interval
Lqr status
Lqr threshold
Magic number
Oversize frame
Perform tagging
Scramble
Signal-Label (C2)
Section trace (J0)
STP RFC 1638
Tagged frame discard
Unknown MAC discard
Untagged frame discard
Device Manager interval
Basic procedures
To change the default settings on the Passport 8683POS Module or to perform any
configuration tasks in Device Manager, select the port you want to configure and
open the Interface tab.
To open the Interface tab:
Do one of the following:
•
Right-click on the port. A shortcut menu opens. Choose Edit.
•
Double-click on the port.
The Port dialog box opens with the Interface tab displayed
This tab displays information about the port and allows you to configure
various elements.
Chapter 4 Managing the Passport 8683POS Module
Default
False
100
Enabled
95
True
Disabled
Disabled
Enabled
0x16
1 (0x01)
Enabled
Disabled
Disabled
Disabled
10 seconds
Using the Passport 8683POS Module
55
(Figure
14).
Advertisement
Table of Contents
