Installing the Passport 8683POS Module
To install the Passport 8683POS Module:
1
Remove the filler panel from the module slot in the Passport 8000 series
chassis
Figure 5 Removing the filler panel
2
Make sure the inserter/extractor levers are extended away from the Passport
8683POS Module front panel
Chapter 3 Installing the Passport 8683POS Module
(Figure
5).
Note: If you are removing a module from the slot in which you want to
place the new Passport 8683POS Module, be sure to:
• Remove all port interface cables
• Release the insertor/extractor levers of the I/O module, and swing
them out.
(Figure
6).
Using the Passport 8683POS Module
37
9058FB