Connecting Over A Wireless Lan Connection (Only When The Wireless Lan Module Is Mounted) - Oki C542 User Manual

5
Pass the LAN cable under the tab, and then close the interface cover.
6
Insert the other end of the LAN cable into the hub.
Connecting over a Wireless LAN Connection (Only When the
Wireless LAN Module is Mounted)
Connect this machine to a network via a wireless LAN access point.
1
Check if your wireless LAN access point matches the following requirements.
Standards: IEEE 802.11 a/b/g/n
Access method: Infrastructure mode
2
Check if the wireless LAN access point supports WPS.
If it does not support WPS, check the SSID and encryption key by referring to the
instruction manual that is included in the wireless LAN access point or other
documents.
• An SSID is also called a network name, ESSID or ESS-ID.
• An encryption key is also called a network key, security key, password, or Pre-shared Key.
- 29 -
2. Setting Up