Steering Stem Removal - Honda 2000 XR50R Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
Install the stopper r ing into the groove in the outer
tube properly.
Install the dust seal over the outer tube.
Wipe any excess grease of the fork slider.
Install the brake cable onto the fork slider and
secure it by tightening the cable nut.
Install the front wheel (page 12· 10).
STEERING STEM
REMOVAL
Remove the f ollowing:
- Number plate (page 2-3)
- Handlebar (page 12-3)
- Front wheel (page 12-5)
- Front fender (page 2-3)
- Steering stem nut and washer
- Fork top bolts and washers
- Top bridge
Remove the steering stem top thread using the spe-
cial tool.
TOOL:
Pin
spanner
07702 - 0020001
Remove the following:
- Upper bearing inner race
-U pper bearing
- Steering stem
- Lower bearing
•
INNER RACE ___ I
12-15