Front Wheel Inspection; Axle; Wheel Bearing; Wheel Rim Runout - Honda 2000 XR50R Service Manual

FRONT WHEEL/BRAKE/SUSPENSION/STEERING
INSPECTION
Axl.
Set the axle in V-blocks and measure the Tunout.
Actual runcut is 1/2 the total indicator reading.
SERVlCE LIMIT: 0.20 mm (0.008 in )
Wheel bearing
Turn the inner race of each bearing with your finger.
The bearings should turn smooth ly and quietl y.
Also check that the bearing outer race fits tightly in
the hub.
Always replaca
Ifle Remove and discard the bearings if they do not
bearings in paJrs.
turn smoothly, quietly, or if they fit loosely in the
hub.
12-6
Wheel rim runout
Check the rim runcut by placing the wheel in a turn-
ing stand.
Spin the w heel by hand, and read the runcut using
8
dial indicator.
Actual runcut is 1/2 1he total indicator reading.
SERVICE LIMITS:
Radial: 2.0 mm (O.OB in)
Axial: 2.0 mm (0.08 in)
DISASSEMBLY
Remove the dust seal.
•