Spark Arrester; Rear Suspension Inspection - Honda 2000 XR50R Service Manual

REAR SUSPENSION INSPECTION
Support the motorcycle on safety stand or box and
raise the reaf wheel off the ground.
Hold the swingarm and move the rear w heel
sideways with force to see if the wheel bearings are
worn.
Check for worn or loose suspension pivot
components by grabbing the swingarm and
attempting to move the 5wingarm side to side.
Check each fastener of the swingarm and shock
absorber,
if
any are looseness is noted.
Also, check the pivot bushings for wear or damage.
Check the action of the shock absorber by compres-
sing it several times.
Check the entire shock absorber assembly for signs
of leaks, damage or loose fasteners.
Replace damaged components which cannot be
repaired.
Tighten all nuts and bolts.
Refer to sect ion 13 f o r shock absorber and
swingarm service.
SPARK ARRESTER
• Wait until theaxhaust
system
has cooled before
removing
or
installing the spark
affester .
• Perform this operation in a well-ventilated area
free
from combustible materials.
Remove the three bolts, spark arrester and gasket
from the muffler.
MAINTENANCE
I
3-17