Exhaust System Removal; Exhaust System Installation - Honda 2000 XR50R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
EXHAUST SYSTEM
Serious burns may result
if
the exhaust system ;5
not allowed
to
cool bafor8 components are
removed
or
s8lVieed.
For spark
REMOVAL
arrestef mainte-
nance, refer to
Remove the seat assembly (page 2-2),
page 3-17
2-4
Remove the exhaust pipe joint nuts.
Remove the mounting bolt and the muffler.
Remove the exhaust pipe joint gasket.
INSTALLATION
Install a new joint gasket into the exhaust port.
Set the exhaust pipe onto the engine by aligning
the exhaust pipe flange with the cylinder head
studs, then install the joint nuts and the mounting
bolt.
Tighten the joint nuts.
Tighten the mounting bolt.
TORQUE: 26 N-m (2.7 kgf-m, 20 Ibf·ft)
Install the seat assembly (page 2-2),
MUFFLER
SPARK ARRESTER
MOUNTING BOLT
26 N·m (2.7 kgf.m. 20 Ibf·ft)
- -lilY
EXHAUST PIPE PROTECTOR
15 N ·m (1.5 kgf.m, 11 Ibf·ft)
6 N·m (0.6 kgf.m, 4.3 Ibf·ft)
•
GASKETe/ •
JOINT NUTS
EXHAUST PIPE COVER
•