Engine Oil Strainer Screen Cleaning; Engine Oil Centrifugal Filter Cleaning - Honda 2000 XR50R Service Manual

MAINTENANCE
Check that the sealing washer on the drain bolt is in
good condition, replace
jf
necessary.
Install end tighten the drain bolt.
TORQUE: 25 N'm (2.5 kgf·m. 18Ibf·ft)
Fill the crankcase w ith recommended engine oil
(page 3·8).
OIL CAPACI1Y:
0.6
fj
(0.6 US
Qt,
O.Slmp qt) at draining
0.8
a
(0.8
us
qt.
0.7 Imp qt) at disassembly
Install the oil filter cap/dipstick.
Start the engine and let it idle for 2 to 3 minutes.
Stop the engine and recheck the oil level.
Make sure there are no oil leaks.
ENGINE OIL STRAINER SCREEN
CLEANING
Remove the right crankcase cover (page 9-3) .
Remove the oil strainer scree n and clean it.
Check the screen for damage and the sea ling
rubber fo r damage o r det er ioration.
Reinstall the oil strainer screen and right crankcase
cover (page
9- 17).
ENGINE OIL CENTRIFUGAL FILTER
CLEANING
3-10
Remove the right crankcase cover, ball retainer and
clutch lifter lever (page 9·3).
Remove the four screws and clutch outer cover.