Side Stand Removal; Side Stand Installation - Honda 2000 XR50R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
SIDE STAND
REMOVAL
Support the motorcycle securely with a hoist or
equivalent.
Retract the side stand and remov e the following:
- return spring
-pivot nut
- pivot bolt
-side stand
INSTALLA nON
Apply grease to the side stand pivot and sliding
surfaces.
Install the side stand with the pivot bolt.
Tighten
the pivot bott.
TORQUE: 10 N·m (1.0 kgf.m, 7Ibf·ft)
Loosen the pivot bolt 45 - 90
Q
•
Install the pivot nut and tighten it while holding the
pivot bolt.
Install the return spring as shown.
Check the side stand operation for freedom of
movement.
--
2-5