Swingarm Installation; Brake Pedal Removal - Honda 2000 XR50R Service Manual

I
INSTALLATION
Install the drive chain slider and tighten the nut.
TORQUE: 12 N·m 0.2 kgf·m, 9Ibf·ft)
Install the swingarm over the frame, then install the
pivot bolt from the right side and the shock
absorber lower mounting bolt from the left side.
Apply grease to the seating surface of the
5wingarm pivot nut.
Instafl and tighten the nuts to the specified torque.
TORQUE: Swingarm: 39 N·m 14.0 kgf.m, 29 Ibf·tt)
Shock absorber:
34 N·m (3.5 kgf.m. 25 Ibf·tt)
Install the drivtt chain guard and tighten the bolts.
Install the drive chain cover and tighten the bolts.
Install the rear wheel (page 13-7).
Install the drive chain (page 3-12).
BRAKE PEDAL
REMOVAL
Remove the rear brake adjusting nut.
REAR WHEEL/BRAKE/SUSPENSION
SLIDER
' - ----
CHAIN GUARD
13-13