Carburetor Installation - Honda 2000 XR50R Service Manual

FUEL SYSTEM
CARBURETOR INSTALLATION
5-8
CARBURETOR BODY
Install new O-rings into the insulator and carbure-
tor body grooves.
Install the carburetor body into the air cleaner
connecting tube and the insulator between the
manifold and carburetor, then install the mounting
botts.
Tighten the connecting
mounting bolts.
TORQUE:
tube band screw and
Connecting tube: 1 N·m (0.1 kgf.m, 0.7 Ibf·tt)
Connect the fu.el tube, drain tube and air vent tube.
THROTTLE VALVE
Install the needle clip on the jet needle.
STANDARD POSmON:
2nd groove from top
•
•
•
•
CLIP
~
•