Seat Removal; Seat Installation; Seat Disassembly/Assembly - Honda 2000 XR50R Service Manual

FRAME/BODY PANELS/EXHAUST SYSTEM
SEAT
REMOVAL
Remove the two trim clips.
Remove the two screws and bolts.
Pull the seat assembly back and remove it.
INSTALLATION
Install the seat assembly by inserting the prongs
into the retainers on the frame.
Install the bolts and screws and tighten them.
Install the trim clips and lock them by pushing the
center pin flush.
BOL
PRONGS
DISASSEMBLY/ASSEMBLY
SEAT ASSEMBLY CLIPS
r~:}7lt----
SCREWS
TANK SHROUDS
SCREWS
REAR FENDER
SEAT
2-2
•
•
•
•