Hitachi PH Instruction Manual page 77

Operations for
modifying the setting
contents.
(See Section 2.1.3,
Operations for
modifying the setting
contents.)
If the cursor is not
displayed, press
Show cursor .
Cursor will move to the
line you touched.
Selected item on the
cursor-positioned line
can be changed by
touching.
3-9 ● Setting Print Format
(2) Operating procedure
● Setting the line spacing to 1, character size to 5×8, inter-character space to 1, and
character width increase to 2
From the "Print description" screen, press Print format .
1
Print format
Column1
. . . . . . . .
. . . . . . . .
. . . . . . . .
Print
format
Select an item whose print format is to be changed.
2
Press Print format .
3
The "Print format" screen then opens.
The on-screen cursor is positioned in the line spacing input field.
Print format
Character size [ ] (1 :
1
Line spacing [ 0 ] (dots 0-2)
Inter-char. space [ 1 ] (dots 0-3)
Increased width [ 1 ] (times 1-9)
1 2 3 4
Print format
Bar code [ ] (0:
0
1 2 3 4
Press the setup item to be edited.
4
Change the value as desired with a numeric key, Decrement
5
key, or Increment key.
Press Apply .
6
● To correct another column, press Previous item or Next item and repeat
steps 2 through 4 .
Press Back twice.
7
You are then returned to the "Print description" screen.
Status: Ready
Column2 Column3
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
Status: Ready
5x5 2 : 5x8 3 : 7x10
4 : 12x16 5 :18x24 6 : 24x32)
. . . . . . . . . .
[ ]
5 6 7 8 9
Status: Ready
none 1:C39 2:ITF 3:NW-7
4:EAN-13 5:DM 6:C128)
. . . . . . . . . .
[ ]
5 6 7 8 9
Com=0
Shut
Manual
down
《 》
.
.
Back
Show Shut
Manual
cursor down
Prev. Next
item item
Prev. Next
dis- dis-
play play
Decre-
ment
Incre-
Back
0
ment
Show Shut
Manual
cursor down
Prev. Next
item item
Prev. Next
dis- dis-
play play
Decre-
ment
Incre-
Back
0
ment