Hitachi PH Instruction Manual page 279

■Circulation control
This is a feature that institutes procedures in
relation to the ink circulation system.
The procedures are for ink drainage, ink refilling,
ink circulation, nozzle backwash, gutter cleaning,
makeup ink refilling, pressure relief, eject ink,
cleaning stop, no-cleaning stop, ink stream
alignment, ink replacement, ink filter
replacement, process prior to long-term shut
down, and process after long-term shut down.
This feature is called up from the maintenance
menu.
■Circulation system environment setup
With this, you can set a value for ink
concentration control. Start it when you are on the
second screen of the circulation control menu.
■<Clear> key
While the user pattern creation screen is
displayed, this key is used to clear the on-screen
pattern.
■Column
Vertical array of print items.
■Communication environment setup
This feature is used to enter various setup data
about external communication. It is called up
from the environment setup menu.
■Confirmation message
The confirmation message window opens to point
out an operating error, indicate operating steps, or
prompt for process selection.
■Copy data
This function copies print data and user pattern
data on a Memory card. Start it on the auxiliary
function menu.
■Count characters
Characters for defining the count control digits.
They are shaded when they are displayed as the
printings within the print content creation screen.
■ Count conditions
The count character range, update unit, and other
count character settings can be entered.
This count condition setup feature is to be called
up from the character input screen.
■Cover open state
State in which the ink is being ejected, no
deflection voltage is applied, and the print head
cover is open.
■Create messages
Function for editing/registering print data which
differs from data being printed. Started from
Auxiliary function menu.
14-2 ● Terms and definitions
■Create user pattern
User pattern creation function. It is called up
from the auxiliary function menu.
■Date/time setup
This function is used to update the current time
and calendar time. It can also be used to effect
changeover between 24- and 12-hour clock
systems.
It is called up from the environment setup menu.
■<Dedicated> key
While the character input screen is displayed, this
key is used to display the dedicated character
keyboard.
■Dedicated characters
"Manufacture", "Best", "Term", and other
standard supported patterns. They can be used
with the 5 x 8 and 7 x 10 character sizes. They are
underlined when they are displayed as printings
within the print description screen.
■Deflection voltage
Voltage applied to the deflection electrodes for
the purpose of bending the flying direction of
charged ink particles.
■<Delete> key
In a character or numerical value input sequence,
this key is pressed to erase the character or
numerical value at the current cursor position.
→ (cf.) <Backspace> key
■Delete stored message
This function is used to delete saved print data.
■Dot mixture
Print data having equal column counts and
inter-column spaces in all rows and equal
character sizes and inter-character spaces in all
print items are defined as data containing "no dot
mixture."
■Drop adjust state
State in which the ink is being ejected, no
deflection voltage is applied, the nozzle head
cover is installed, and the auto-phase is not
established.
■<Duplicate> key
While the substitution rule setup screen is
displayed, this key copies the data at the
preceding position to the item position over
which the cursor is currently positioned.
D