Hitachi PH Instruction Manual page 76

● When alphabet character has been set to the upper limit value, if Code set C of Code
128 is set, all characters in the item will be replaced with invalid characters.
● The start and stop codes are automatically added.
Notice of inserting an EAN-13 bar code
● When inserting an EAN-13 bar code, you must enter a two-digit code in the
EAN prefix area.
● The input data must be 10 digits. If the input data is less than 10 digits, the "No
print contents" fault will happen.
● The guard bar, center bar and check code are automatically added.
Left barcode portion
Units
Guard position First 5 digits of
bar of Prefix the input data
code
● When adding EAN readable code (human readable code), select size 5x5 or
5x7 of the numerals to be added.
Conditions that allow printing by adding identification code
No.
1 Made the number of lines of the EAN-13 printing item 1 line.
2
Set character size 12
Notice of DM code is used
● Set as shown below for print item to which DM is to be set:
(i) Number of lines: 1 line
(ii) Character size: 5×8, 12×16, 18×24
● Set barcode type to "DM" on the print format screen, and select the size.
Data matrix: Type of size and maximum character number
Character size.
DM size
Maximum Numeral only
character Alphabet only
number Alpha-numera 10-19 12-23 32-63 49-97 18-35 22-43 30-59 36-71
● Input characters within the specified digit number for print item to which
barcode has been set. If characters exceed ten digits, input across multiple
items.
● When alphabet letters and numerals occur together,the number of characters
which can be coded will vary depending on character array.
● When "DM8×32" is used, set item "character size 1"on the user environment
setup screen to "5×8".
Notice of Code 128 is used
● With multiple line printing, only one "Code 128" can be set to the same line.
If two or more "Code 128"s are set to the same line, "Barcode incorrect 2"
error will occur.
Center
bar
5 digits
Condition
× × ×
16, 18 24, or 24
× ×
5 8 12 16
× × ×
8 32 16 16 16 36 16
20 24 64
10 12 32
Right barcode portion
Next 5 digits of Check
the input data code
5 digits
1 digit
32.
×
18 24
× × × ×
48 18 18 20 20 22 22 24
98 36 44 60
49 18 22 30
● Setting Print Format 3-8
Guard
bar
×
24
72
36