Hitachi PH Instruction Manual page 222

Pull out the ink reservoir.
8
Ink reservoir
Uncap the ink reservoir, and drain the ink remaining in the
9
reservoir.
Ink reservoir
Beaker
Add the new ink to the ink reservoir.
10
● Fill the reservoir at least 2/3 full of the ink. Be careful of overfilling.
Ink reservoir
Cap
Fasten the cap of the ink reservoir.
11
● Fasten it securely. Solvent components may evaporate.
Push in the reservoir to return it to the original position.
12
Pull out.
If ink is accidentally spilt,
wipe it up promptly with
wiping paper or something
similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped
portion has completely dried.
Cap
If ink is accidentally spilt,
wipe it up promptly with
wiping paper or something
similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped
portion has completely dried.
CAUTION
CAUTION
● Ink Replacement 7-10