Hitachi PH Instruction Manual page 64

Precautions to be observed when changing the printings,
print format, or print line setup data
● When the following setup (
automatically switched to the single scan control. You should bear in mind
that the print quality varies with the employed printing method
particularly when the ink drop use percentage is 1/1 or 1/2. To determine
which printing method is currently selected, view the printing
specifications screen.
1
When differing print formats are designated for some or all setup items
2
When differing line count settings are employed for some or all columns
3 The ink drop use percentage is changed to 1/5 to 1/16.
● Perform the following setup to make prints by the printing method of line
spacing control (interlaced).
1
Ensure that the same print format is employed for all items.
2
Ensure that the same line count setting is employed for all columns.
3
The ink drop use percentage is 1/1 to 1/4.
Perform overall column setup. The format for the first item is
then applied to all the other items so as to provide line spacing
control setup. When making a 1-line print, the single scan
control predominates even if you perform steps 1 through 3 .
Ejecting the ink using the control menu
This feature is used to eject the ink from the nozzle with no intention of printing (for
maintenance purposes only).
Press the Start up key to make prints on paper.
Start up : Ejects ink while applying deflection voltage.
Eject ink : Ejects ink while applying no deflection voltage.
● You can abort the operation by pressing the Cancel key from either the "Manual
Control Menu" screen or the confirmation screen.
● Even if you perform the above ink ejection procedure with the print head cover
installed, the printer does become ready for printing (but goes into the standby state).
- ) is employed, the printing method is
1
3
Com=0
Start
up
《 》
Menu
Manual Control Menu
Online/
Start up Eject ink
Offline
Press the Eject ink key.
Ink Jet Startup Confirmation
The ink jet will be turned ON.
Solution To turn the ink jet ON, press [Ready].
Ready
Press the Ready key.
1
Press the Start up key.
Manual Control Menu
2
The manual control
menu appears.
Cancel
The confirmation
3
screen opens.
Cancel
●Startup 2-9