Hitachi PH Instruction Manual page 249

7-37 ● Long-term Shutdown
Next, the following guidance appears.
3
Circulation control
Process : Process prior to long-term shutdown.
Operating guide
Place the ink reservoir tube
connection block in a beaker charged
with makeup ink.
When ready, press [Start/Continue].
Proc.time: Approx. 6 minutes
Drain the ink ejected into the beaker, clean the beaker and
4
then put 50ml of the makeup ink and a tube connection block
into the beaker.
Tube connection block
Press the Start/Continue key.
5
● The following screen then opens and cleaning of the circulation system
starts.
Circulation control
Process : Process prior to long-term shutdown
Proc.time: Approx. 6 minutes
Status: Stop Com=0
Ink drainage
System-clean
Ink drainage
System-clean
Proc. status: In progress
If ink is accidentally spilt,
wipe it up promptly with
wiping paper or something
similar.
In addition, do not close the
maintenance cover until you
are sure that the wiped
portion has completely dried.
Beaker
Status: Stop Com=0
Ink drainage
System-clean
Ink drainage
System-clean
Proc. status: In progress
Abort
Start/
Continue
CAUTION
Abort