Hitachi PH Instruction Manual page 73

If the cursor is not
displayed, press
Show cursor .
2
Selecting a line count setting of 2 for the first column
From the "Print description" screen, press Print line setup .
1
Print line
setup message
The "Print line setup" screen then opens.
Print description Print line setup
Column1 Column1
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
Print line Print line
setup type setup type
1 line 1 line 2 line 2 lines
Press 2 lines .
2
Press OK .
3
The first column is then set to 2 lines.
● To change the setting for another column, and then repeat step 2 .
Edit Print Print Select
format spec. message
Status: Ready Status: Ready
Column2 Column2
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
Overall column setup Overall column setup
Individual column setup Individual column setup
Insert Insert
3 lines 3 line 4 line 4 lines
column column
Save
Menu
message
Com=0
Shut Shut
Manual Manual
down down
Column3 Column3
. . . . . . . . . . . . . .
《 《
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
Count reset Cancel
Delete Delete
OK OK
column column
● Setting Print Lines 3-5
》 》