Hitachi PH Instruction Manual page 182

● Target sensor filter
ESC Header 38H
ESC Header 39H
● High-speed printing
ESC Header 3AH
● Product speed matching
ESC Header 3BH
● Pulse rate division Factor
ESC Header 3CH
● Ink drop use percentage
ESC Header 3DH
● Two or more print specification items can be consecutively transmitted in a
single chain.
(3) Print format
a) Print format text structure
● Specifying no print items
Print format text
● Specifying the print items
ESC Header 24H
Item number selection (1 to 100)
b) Setup items
● Line count and Line spacing
ESC Header 22H
● Character size and inter-character space
ESC Header 21H Character size Inter-character space
● Bar code type
ESC Header 2AH
Thousands Hudreds
position position
Target sensor filter (0000 to 9999)
Division
Division (1: time setup, 2: until end of print.)
Mode
Mode (0: HM, 1: NM, 2: QM)
Based
Based (0: Time-based, 1: Encoder based)
Hudreds
Tens position Units position
position
Pulse rate division Factor (001 to 999)
Tens position Units position
Ink drop use percentage (01 to 16)
Item number Print format text
Line count Line spacing
Line count Line spacing
(1 to 4) (1 to 2)
Character size Inter-character space
( 0 to 5) (0 to 8)
Type
Bar code type (30H to 3CH)
Tens position Units position
Set actual item number data as
indicated in the example below.
If the software option "Print digit
addition" is not used, ensure that the
item number does not exceed 24.
Item number1...31H
Item number2...32H
Character size
0:5×5
1:5×8 (5×7)
2:7×10 (9×8, 9×7)
3:12×16
4:18×24
5:24×32
Bar code types
30H:Code39
31H:ITF
32H:NW-7
33H:EAN-13
34H:DM16×16
35H:DM8×32
36H:Code128
37H:DM16×36
38H:DM16×48
39H:DM18×18
3AH:DM20×20
3BH:DM22×22
3CH:DM24×24
● Transmission Sequences 6-21