Hitachi PH Instruction Manual page 107

Cursor will move to the
line you touched.
3-39 ● Setting Repeat Printing
(2) Operating procedure
Set the repeat intervals and repeat count.
The "Print specifications" screen is displayed.
Set the repeat intervals.
1
● The unit of repeat intervals can be changed by pressing
Character unit CH and Scanning unit SC .
Character unit CH is to set the character width unit and
Scanning unit SC is to set the interval by one dot width.
Press 0 3 0 0 for Scanning unit SC .
2
A repeat intervals setting of 300 is then selected.
Print specifications
Print start delay
Reverse direction [ 0 0 0 0 ] (character unit SC 0-9999)
Repeat intervals
Repeat count
1 2 3
Press Repaet count .
3
The cursor then moves to the repeat count input field.
Press 9 four times consecutively.
4
The repeat count is then set to 9999.
Print specifications
Print start delay
Reverse direction [ 0 0 0 0 ] (character unit SC 0-9999)
Repeat intervals
Repeat count
1 2 3
Press Apply .
5
Press Back .
6
You are then returned to the "Printing description" screen.
Status: Ready
[ 0 0 0 0 ] (scanning unit SC 0-9999)
0
[ 3 0 0 ] (scanning unit SC 0-9999)
[ 0 0 0 0 ] (0:none, 1-9998, 9999:continuous)
4 5 6 7 8 9
Status: Ready
[ 0 0 0 0 ] (scanning unit SC 0-9999)
[ 0 3 0 0 ] (scanning unit SC 0-9999)
[ 9 9 9 9 ] (0:none, 1-9998, 9999:continuous)
4 5 6 7 8 9
Shut
Apply Manual
down
Prev. Next
dis- dis-
paly paly
← →
Decre-
Unit Change
ment
Incre-
Back
0
ment
Shut
Apply
Manual
down
Prev. Next
dis- dis-
paly paly
← →
Decre-
Unit Change
ment
Incre-
Back
0
ment